- Contact Person : Mr. Dim Boyce
- Company Name : Shenzhen Tech-Source Electronic Co., Ltd.
- Tel : 86-755-83937389
- Fax : 86-755-83937385
- Address : Guangdong,ShenZhen,Room No.818,TianJian Apartment ShangBao Road,FuTian District,ShenZhen
- Country/Region : China
LCD Display control Board with VGA and build in power
LCD Display control Board with VGA and build in power
JRYN1A31 is LCD Display control Board, to support 1920*1200 and below LED Panel, the main chip used TSUM1PTR-LF.
It complete from the PC output VGA analog signals to LCD module can support LVDS signal of the conversion, the design is mainly used for TFT LCD PANEL matching, the product is suitable in the 1920 * 1200 and the following 8 - Bit and 6 - Bit screen. To realize the maximum resolution can reach WUXGA analog R, G, B input signal representation, the color reappearance of support to 24bit and tiptop was 16.7 million pixels, ADC frequency of 165MHz. And have DCR (dynamic contrast regulation), color enhancement, and the special function, make color emersion more lifelike, more bright-colored, more vivid, at the same time support HDCP function. Synchronous automatic detection can be realized. Synchronous detection means, ask use line field separation of synchronizing signal; The OSD interface with exquisite style, 8 selection of OSD language.
Software support 16:10 and 4:3 display mode of switching function, this function for playing a game of users provide great convenience, the motherboard software support online updates and VGA function ,the maximum output resolution support 1920 * 1200.
Not otherwise specified, products in line with norms within this document description..
Control panel support specifications
Signal Input | RGB Analog(0.7Vp-p),Linefield Synchronization Isolate Signal |
Support Mode | DOS,VGA,SVGA,XGA,SXGA,WXGA,WXGA+,WUXGA |
Colors | 18bit/24bit |
Horizontal Freq | 31.5-94.038KHz |
Vertical Freq | 60-75Hz |
Output signal | LVDS standard |
Control KEY | POWER,LEFT,RIGHT,AUTO,MENU,UP,DOWN,7 keys. |
OSD MENU | Brightness,Contrast,Auto Detect,Phase,Clock,H.Position,function set, Restoration and otherwise. |
OSD Languages | English,Janpanese,Chinese,Franch,Korean and many other languages. |
Upgrade procedure | Support VGA-line upgrades |
Power Input | Build in power,+5V input, +5V(+/-0.2V) |
Power Operation | Normal operation mode, low-power mode |
Standby power | Less than 0.5W |
PCB Size | 113mm(L)×58mm(W)×1.2mm(H) |
Plug and Play | Support |
LCD Display control Board with VGA and build in power
